Operating Instructions

EN-25
Selecting the Metering Mode
You can select the metering mode that sets which part of the subject to measure
to determine the exposure.
1. Rotate the mode dial to P , , , or
and turn your camera on by pressing the
button.
2. Press , then use X to select the [FUNCTION]
menu.
3. Use T to select [METERING], then press the
button.
4. Use S or T to select the desired metering mode,
then press the button.


 [ AVERAGE]: Averages the light metered
from the entire frame, but gives greater weight
to the subject matter at the center.


 [ SPOT]: Meters the area within the spot
automatic exposure point frame at the center
of the LCD monitor.
5. To exit from the menu, press the button.
6. Compose your subject within the focus frame.
7. Press the shutter button to capture the image.
PICTURE FUNCTION
3 / 3
X1
AUTO
METERING
SPOT
2 / 2
AVERAGE