Operating Instructions

EN-24
ADVANCED SHOOTING
Burst
This mode is used for continuous shooting. 3 pictures are taken continuously
once the shutter button is pressed.
1. Rotate the mode dial to P , , , or and
turn your camera on by pressing the button.
2. Press , then use X to select the [FUNCTION] menu.
3. Use T to select [CAPTURE MODE], then press
the button.
4. Use S or T to select [BURST], then press the
button.
5. To exit from the menu, press the button.


 The indicator is displayed on the monitor screen.
6. Press the shutter button halfway to lock the focus.
7. Press the shutter button all the way to shoot.
 In Burst mode, the flash mode will be set to OFF automatically.
Auto Exposure Bracketing (AEB)
In this mode, the camera automatically changes the exposure within a set range
to take three shots after you press the shutter button once. AEB settings can be
combined with exposure compensation settings to extend the adjustment range.
1. Rotate the mode dial to P , , , or and
turn your camera on by pressing the button.
2. Press , then use X to select the [FUNCTION] menu.
3. Use T to select [CAPTURE MODE], then press
the button.
4. Use S or T to select [AEB], then press the button.
5. To exit from the menu, press the button.


 The indicator is displayed on the monitor screen.
6. Press the shutter button to shoot.
 In AEB mode, the flash mode will be set to OFF automatically.
CAPTURE MODE
BURST
SINGLE
X1
AEB
2 / 3
PICTURE FUNCTION
2 / 3
AUTO
CAPTURE MODE
BURST
SINGLE
X1
AEB
3 / 3
PICTURE FUNCTION
2 / 3
AUTO