User Guide
19
Client Mode
In Client Mode, you will see a list of available APs that you can connect your
MWA2 Wireless Adapter to, as follows:
1. Ensure Client Mode is set to ON.
2. Select an AP from the list shown. (If you do not see the AP you are looking
for, try selecting Refresh. If the AP is hidden, you can add it manually by
selecting Add and inputting the necessary details.)
3. If the network requires a password, you will be asked to input the PSK.
HighlightthePSKentryeldandanon-screenkeyboardwillappear.
4. Fill in the PSK using the on-screen keyboard.