Service manual

C20
Condential
6-4
(3) Choose the source le
''C20 EDID_XX.ini''.
(4) Click ''Open''.
3. Programming
(1) Key in the serial number into the
barcode blank space.
(2) In "Write Source Select", click “Analog”.
(3) Click "Program".
4. When the message “Please change
the cable to Analog” shows on the
screen, click “OK” button.
5.When the message “Please change
the cable to Digital” shows on the
screen, click “OK” button.
(3)
(4)
(1)
(3)
(2)