User Guide

Audio
Mode - Stardard
70Picture Volume
Enter
Move
X
Off
Mute
Color
OSD
System
Audio
Pertormance
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Audio from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. Volume: Adjust the volume
5. Mute:
To choose mute on/o󰀨 .
Performance
Mode - Standard
Picture
Color
Over Drive
Normal
On
Adapve Sync
Enter
Move
Exit
Off
Refresh Rate Num
OSD
System
Audio
Pertormance
X
On
Ultra-Low Latency
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Performance from the OSD.Then toggle
to the right to navigate to the element you wish to adjust and press the joystick to enter
it.
3. Toggle to the left or right to adjust the sliding scales.
4. Over Drive: Select O󰀨, Normal or Extreme.
5. AdaptiveSync: To control support AdaptiveSync or not, default is On.
-----------------------------------------------------------------------------------------------------------
Note:
If AdaptiveSync is “ON”, then the Over Drive selection is set to “Normal”
automatically.
6. Refresh rate num: Display the panel’s current refresh rate on the screen.
-----------------------------------------------------------------------------------------------------------
Note:
If AdaptiveSync set "On" you can see the V Frequency to changes in the OSD.