User Guide
Table Of Contents
- Information for your safety and comfort
- Safety instructions
- Special notes on LCD monitors
- Cleaning your monitor
- Accessibility
- Safe listening
- Warnings
- Using electrical power
- Product servicing
- Potentially explosive environments
- Additional safety information
- IT Equipment Recycling Information
- Disposal instructions
- LCD pixel statement
- Tips and information for comfortable use
- Finding your comfort zone
- Taking care of your vision
- Developing good work habits
- Federal Communications Commission Supplier's Declaration of Conformity
- TCO Certified
- Unpacking
- Connecting the Power cord
- Power saving
- Installation
- Daisy-chain function
- User Controls
- Troubleshooting
English
• CIE 1931 positive and negative error of 0.05, ("HDR" according to current Panel
to ne-tune).
• Color Space = HDR, the Modes = HDR, Picture page HDR = Auto.
• Modes = (Action/Racing/Sports/User/Standard/ECO/Graphics) is selected; the
color space is auto set to “General”.
• Color Space = (sRGB/Rec.709/HDR/EBU/DCI/SMPTE-C), If to adjust the
parameter the Modes will not jump to User mode, but the Color Space =
“General” except.
• Color Space = (sRGB/Rec.709/HDR/EBU/DCI/SMPTE-C), 6-Axis Hue &
Saturate is gray out and unavailable.
• Color Space = (sRGB/Rec.709/HDR/EBU/DCI/SMPTE-C), Grayscale Mode is
gray out and unavailable.
• Color Space = (sRGB/Rec.709/HDR/EBU/DCI/SMPTE-C), (Light & Color)
Sensor are gray out and unavailable.
•
8. ColorSense: Automatically adjust color temperature smoothly.
-----------------------------------------------------------------------------------------------------------
Note:
• ColorSense is On, Factory Menu can check the CT (Color Temp) Value.
• Mode = HDR, does not support the ColorSense.
• Color Space = (sRGB/Rec.709/HDR/EBU/DCI/SMPTE-C), does not support
the ColorSense.
• ColorSense is on, the Modes is User, the (Contrast, Color Temp, Low Blue
Light, 6 axis Hue, 6 axis Saturate, Grayscale Mode) functions are gray out
and unavailable.
9. Grayscale Mode:To choose Grayscale mode.
10. 6-axis Hue: Adjust the red, green, blue, yellow, magenta and cyan hue.
11. 6-axis
Saturate: Adjust the red, green, blue, yellow, magenta and cyan saturation.