User Guide
Table Of Contents
- Information for your safety and comfort
- Safety instructions
- Special notes on LCD monitors
- Cleaning your monitor
- Accessibility
- Safe listening
- Warnings
- Using electrical power
- Product servicing
- Potentially explosive environments
- Additional safety information
- IT Equipment Recycling Information
- Disposal instructions
- LCD pixel statement
- Tips and information for comfortable use
- Finding your comfort zone
- Taking care of your vision
- Developing good work habits
- Federal Communications Commission Supplier's Declaration of Conformity
- TCO Certified
- Unpacking
- Connecting the Power cord
- Power saving
- Installation
- Daisy-chain function
- User Controls
- Troubleshooting
English
Installation
1. Turn o your computer and unplug your computer's power cord.
2. Connect the signal cable to the DP (optional) and/or HDMI (optional) input socket of the monitor,
and the DP (optional) and/or HDMI (optional) output socket of the graphics card on the computer.
Then tighten the thumbscrews on the signal cable connector.
3. Connect the USB Cable(Optional)
Connect the USB cable to port for fast charge.
Connect the USB cable to port.
4. USB Type C Cable (Optional, USB Type-C input models only)
Connect one end of the USB type C cable (optional) to your computer and connect the other end to
your electric devices.
5. Insert the monitor power cable into the power port at the back of the monitor.
6. Plug the power cords of your computer and your monitor into a nearby electrical outlet.
7. Connecting HDMI/DP+USB-B to computer 1 and USB-C to computer 2 when Control up to 2
computers from a single set of keyboard and mouse connected to the monitor.
Visit Acer Support website to download IR webcam driver:
https://www.acer.com/worldwide/support/
Note:
1. Audio output is only for audio output model. Please check user manual for more instruction.
2. RJ45:support 10M/100M/1000Mbps
3. If your computer USB-C do not have DP-Alt, pls connect HDMI/DP+USB-B to computer 1 and
HDMI/DP+USB-C to computer 2.
USB Type C
USB
DP
*POWER CORD specifications refer to page15
*For the installation of replaceable parts, please refer to the above installation instructions.
*Users may go to the local service network to replace /purchase the qualified replaceable parts.
For local service centers and service contacts, please refer to https://www.acer.com/ac/en/US/content/
support
*IR webcam feature depends on model, sku and/or region.