User Guide

ATTACHING/REMOVING THE BASEATTACHING/REMOVING THE BASE
ATTACHING/REMOVING THE BASEATTACHING/REMOVING THE BASE
ATTACHING/REMOVING THE BASE
Install: Align the base with the stand and push the base towards the top of
the monitor, and then rotate the base clockwise. Tighten the screw clock-
wise.
Remove: Reverse the steps to remove the base.
2
English
(Forrotatingmodelsonly)




(Forliftingmodelsonly)

INSTALLATION INSTRUCTIONS
Do not perform a pulling or plugging action when the display is under
slanting status to prevent the display from ejecting.