Manual

13
Mainboard jumper settings
No. Code Jumper Default Setting
1 BIOS_WP BIOS data
write protect
1-2 Close: Normal (default setting)
2-3 Close: Enable BIOS write
protect
2PASSWORDSet
Supervisor
Password
1-2 Close: Set Supervisor Password
(default setting)
2-3 Close: Clear Supervisor
Password
3 BIOS_RVCR BIOS recovery 1-2 Close: Normal (default setting)
2-3 Close: Enable BIOS recovery
4 CLR_CMOS1 Clear CMOS 1-2 Close: Normal (default setting)
2-3 Close: Clear CMOS