Manual

125
Configuring the BMC NIC settings
You can configure the BMC NIC settings using DHCP or static IP
addressing.
Configuring the BMC NIC settings using DHCP
1 Enter the BIOS setup (see "Entering BIOS Setup" on page 59).
2 Select Server Management menu.
3 Select System Information then press <Enter>.
4 Select BMC IP Address Source then press <Enter>.
5 Select DHCP.
6 Press <F10>.
7 Select Yes to save the modified password and close the Setup
Utility.
Configuring the BMC NIC settings using a static IP address
1 Enter the BIOS setup (see "Entering BIOS Setup" on page 59).
2 Select Server Management menu.
3 Select System Information then press <Enter>.
4 Select BMC IP Address Source then press <Enter>.