Operation Manual

English
27
Scanning for channels
1
MENU
Press the MENU key on the remote control to bring up the OSD.
2
Use the directional keys to navigate and select Channel
Management.
3
OK
Highlight Auto Scan. Then, select Start and press OK to begin.
4
Auto scan for channels
The first time you completed the setup wizard, all available channels were listed. If you
need to re-scan for new channels, please follow the steps below:
MENU
OK
Reordering for channels
1
MENU
Press the MENU key on the remote control to bring up the OSD.
2
OK
Use the directional keys to navigate and select Channel
Management. Then select Channel Edit.
3
MENU
OK
Highlight Reorder. Then,
select the channel you wish
to reorder and press OK to
confirm. Move to the right
channel number and press
OK to reconfirm.
4
MENU
Press MENU to exit.