Owner manual

1 System tour
14
Mainboard jumper settings
No. Code Jumper Default Setting
1 JP7 ME Mode Select Open (Normal)
2 JP5 ME Recovery Open (Normal)
3 JWD Watch Dog 1-2 Close: Reset (default setting)
2-3 Close: NMI
Open: Disabled
4 JBT1 Clear CMOS To clear CMOS, use a metal object
such as a small screwdriver to touch
both pads at the same time to
short the connection.
5 JPG1 Enable VGA 1-2 Close: Enabled (default setting)
2-3 Close: Disabled