Technical information

Chapter 2 35
Integrated Peripherals
Parameter Description Option
SiS OnChip IDE Device Use the arrow keys to select your options;
press <Enter> key to enter the setup sub-
menu. The options and setting methods are
discussed below.
[Press Enter]
SIS OnChip PCI Device [Press Enter]
Onboard Super IO Device [Press Enter]
IDE HDD Block Mode Block mode is also called block transfer,
multiple commands or multiple sector read/
write. If your IDE hard drive supports block
mode (most new drives do), select
“Enabled” for automatic detection of the
optimal number of block read/write per
sector the drive can support.
Disabled
Enabled
Onboard Lan Boot ROM Decide whether to invoke the boot ROM of
onboard LAN chip.
[ Disabled ]
Init Display First If you installed a PCI VGA card and an AGP
card at the same time, this item lets you
decide which one is the initial display card.
PCI Slot
AGP
XSIS OnChip IDE Device [ Press Enter ] Item Help
X SIS OnChip PCI Device [ Press Enter ]
XOnboard Super IO Device [ Press Enter ] Menu Level X
IDE HDD Block Mode [ Enabled ]
Onboard Lan Boot ROM [ Disabled ]
Init Display First [ PCI Slot ]
Phoenix - AwardBIOS CMOS Setup Utility
Integrated Peripherals
KLIJ: Move Enter: Select +/-/PU/PD: Value F10:Save ESC: Exit F1: General Help
F5: Previous Values F7: Optimized Defaults