Technical information

Chapter 2 23
Main
The Main screen allows the user to set the system time and date as well as enable and disable boot option
and recovery.
NOTE: The screen above is for your reference only. Actual values may differ.
The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
Parameter Description Format/Option
System Time Sets the system time. The hours are displayed with 24-
hour format.
Format: HH:MM:SS
(hour:minute:second)
System Date Sets the system date. Format MM/DD/YYYY
(month/day/year)
System Memory This field reports the total memory size of the system.
Memory size is fixed to 1015 MB.
N/A
Quiet Boot Allows startup to skip normal POST messages while
booting, decreasing the time needed to boot the
system.
Option: Enabled or Disabled
Network Boot Enables, disables the system boot from LAN (remote
server).
Option: Enabled or Disabled
F12 Boot Menu Enables, disables Boot Menu during POST. Option: Enabled or Enabled
D2D Recovery Enables, disables D2D Recovery function. The function
allows the user to create a hidden partition on hard disc
drive to store operation system and restore the system
to factory defaults.
Option: Enabled or Disabled
Item Specific Help
This is the help for the
hour field. Valid range
is from 0 to 23.
INCREASE/REDUCE : F5/F6
F1
ESC
Help
Exit
Select Item
Select Menu
Change Values
Select SubMenu
Enter
F9
F10
Setup Default
Save and Exit
[19:10:59]
[01/09/2009]
1015 MB
[Hitachi HTS543216L9SA00-(PM)]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[19:10:59]
[01/09/2009]
1015 MB
[Hitachi HTS543216L9SA00-(PM)]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
System Time:
System Date:
System Memory:
Primary Master
Quiet Boot:
Network Boot:
F12 Boot Menu:
D2D Recovery:
System Time:
System Date:
System Memory:
Primary Master
Quiet Boot:
Network Boot:
F12 Boot Menu:
D2D Recovery:
F5/F6
Phoenix SecureCore(tm) Setup Utility
Main Boot ExitSecurityInformation Intel
X