User Guide

Chapter Four : Using Your ARMC Card

Host Health Information, Continued

Loading an SDK File, Continued

Step Description

5 Left click the Upload button.

6 Once the SDK file is uploaded, the following screen appears.

Note: If the reading displays access failed, try the following:

• If your serverboard does not have or support a BMC, check the ARMC 20-pin cable or the

3-pin or 4-pin IPMB connector to see if the cable is plugged in correctly.

• The SDK file may be corrupt. Try to upload the SDK file again.

• The SDK file you uploaded may be for a different motherboard. Make sure you are

uploaded the correct SDK file.

Cont’d