User guide

3 System upgrades
36
3 Lock the HDD carrier.
Observe the post-installation instructions described on page 27
Removing the 2.5” Carrier Cage
1 Observe the ESD precautions described on page 26.
2 Observe the Pre-installation instructions on page 26.
3 Unplug the power and data cables from the cage drives.
4 Remove the four screws of the HDD cage (1).
5 Slide the HDD cage out of the system chassis (2).
6 Observe the post-installation instructions described on page 27.
Installing the 2.5” Carrier Cage
1 Slide the HDD cage into the system chassis.