User guide

3 System upgrades
32
Removing and installing a 3.5” hard disk
drive
Removing a 3.5” hard disk drive with carrier
1 Observe the ESD precautions described on page 26.
2 Remove the carrier with failed HDD.
3 Remove the HDD carrier.
(1) Unlock the HDD carrier latch.
(2) Slide the HDD carrier latch to release the lever.
HDD access Blink Off
RAID add-on card
HDD present no access SAS: On
SATA: Off
HDD access Blink
HDD failure On
HDD removal Off Off
HDD insertion and rebuilding Blink 1Hz
HDD locate Blink 4Hz
Description