User Guide

37
2 Replace the four screws of the HDD cage.
3 Pug the power and data cables of the carrier hard drives.
4 Install the top cover. See page 28.
5 Observe the post-installation instructions described on page 27.
Removing and installing an optical drive
The system supports a slim SATA optical drive.
Removing an optical drive
1 Observe the ESD precautions described on page 26.
2 Observe the Pre-installation instructions on page 26.
3 Unplug the power and data cables from the drive (1),(2).
4 Locate the locking tab at the rear of the drive.