Manual

53
• Mirroring mode needs the channel 1 & channel 2 with identical
DIMM. DIMM slot populations within a channel do not have to be
identical but the same DIMM slot location across channel 1 and
channel 2 must be the same. DIMM1A and DIMM2A should be the
same type, size and manufacturer. DIMM1B and DIMM2B memory
should be the same type, size and manufacturer. DIMM1C and
DIMM2C memory should be the same type, size and manufacturer.
• Same rule is applied to the CPU2.
Mirroring mode single processor configuration:
Notes: 1. Place DIMMs in “X” location.
2. DIMM population must correspond to the above tables.
3. DIMM modules support 1 GB, 2 GB and 4 GB DIMMs.
4. DIMM modules support 8 GB and 16 GB DIMMs (support
depends on availability).
5. Do not mix UDIMMs with RDIMMs.
6. 3-DIMM per channel configuration is only available for
single/dual rank RDIMM.
Mirroring mode dual processor configuration:
Channel 1
DIMM slots
Channel 2
DIMM slots
Channel 3
DIMM slots
Notes
Configuration 1C 1B 1A 2C 2B 2A 3C 3B 3A
AXXNANANA
BXXXXNANANA
C X X X X X X NA NA NA SR, DR RDIMMS
ONLY
CPU1 CPU2
Config
1C 1B 1A 2C 2B 2A 3C 3B 3A 1C 1B 1A 2C 2B 2A 3C 3B 3A
A
X X NA NA NA NA NA NA
B
X X NA NA NA X X NA NA NA
C
X X X X NA NA NA X X NA NA NA
D
XX XXNANANA XX XXNANANA