Manual

3 System upgrades
52
Installing an expansion card
Your server has a preinstalled riser card designed specifically for use in
the 1U rackmount chassis. Depending on the type of riser card
installed, you can install the following expansion cards:
• Left riser card (pre-installed)
• PCI Express 2.0 x16 (full-height)
• 8-port 3Gb/s SAS RAID Flex I/O Adapter
• Right riser card (optional)
• Gigabit Dual Port Server Adapter (low-profile)
Installing a PCI Express card
1 Remove the screw that secures the left PCI expansion slot shield to
the server.
2 Slide the bolts to move the shield lock in the direction shown
below.
3 Remove the PCI slot shield.