Manual

Removing and installing an optical drive

The system supports a slim SATA optical drive.

1 Observe the ESD precautions described on page 24.

2 Remove the top cover. See page 33.

3 If an optical drive is present in the system, unplug the power and

data cables from the drive.

4 Locate the locking tab at the rear of the drive.

5 Pull the tab away from the drive and push the drive out of the

system.

6 Insert a new drive. The drive is properly inserted if you hear a click

and the locking tab locks into place.

7 Reconnect the power and data cables to the new optical drive.

Note: I-SATA5 port is reserved for connecting to the installed

optical drive.