Manual

1 System tour
12
Note: Jumpers not indicated are for test purposes only.
5 JBT1 Clear CMOS Instead of pins, this jumper consists of
contact pads to prevent accidental
clearing of the CMOS contents. To
clear CMOS, disconnect the power and
short the CMOS pads with a metal
object such as a small screwdriver.
6
JI
2
C1
SMB to PCI-Exp.
Slots
Allows you to connect the System
Management Bus to the PCI Express
slots.
Open (Disabled).
Close (Enabled).
7
JI
2
C2
SMB to PCI-Exp.
Slots
Allows you to connect the System
Management Bus to the PCI Express
slots.
Open (Disabled).
Close (Enabled).
8 JPG1 Enable/Disable
VGA
Pins 1-2 (Enabled).
9 JPL1 Enable/Disable
LAN1/2
Pins 1-2 (Enabled).
No. Jumper Description Default Setting