User Guide

95
PnP/PCI Options
PnP/PCI Options allows you to specify the settings for your PCI
devices. Selecting this option displays the screen below:
Parameter Description Option
PCI IRQ
Setting
Select Auto to let BIOS automatically
configure the plug-and-play devices
installed on your system; Otherwise, select
Manual.
Note: Refer to the documentation that
came with your PCI card for more technical
information.
Auto
Manual
PCI Slot 1
PCI Slot 2
When you set the PCI IRQ Setting
parameter to Auto, these parameters
specify the auto-assigned interrupt for each
of the PCI devices.
When you set the PCI IRQ Setting parameter
to Manual, you need to specify the interrupt
that you want to assign for each PCI device
installed in your system.
User input
aa r500.book Page 95 Monday, October 22, 2001 9:32 AM