User Guide

91
Hidden
Partition
If you want the hidden partition to become
accessible, set this parameter to Enabled.
When enabled, the server boots to the
hidden partition.
Disabled
Enabled
Communication
Protocol
This parameter specifies the parity, stop bits,
and data length for the COM port to use for
RDM connection. This is fixed at
N (none), 8, 1 setting and is
non-configurable.
N, 8, 1
COM Port Baud
Rate
This parameter lets you set the transfer rate
of the COM port for RDM connection. The
parameter setting depends on your modem
specification; therefore, before you change
the setting of this parameter, check the
documentation that came with your modem.
57600
9600
Detect Tone * When enabled, RDM first checks for the
existence of a telephone tone before it dials
out.
When disabled, RDM proceeds with the dial-
ing process without checking for a
telephone tone.
Enabled
Disabled
Remote
Console Phone
No.
This parameter allows you to set the phone
number of the RDM manager station that
the RDM module must dial once RDM is acti-
vated and the Remote Console is enabled.
To set, simply highlight the parameter and
enter the Remote Console phone number.
If the remote console phone number is using
an (X) line, then you must enter six commas
(,) after the phone number and before the
extension number, if any. When entering
the extension number, we
recommend that you insert a comma after
each number. The commas specify delay.
If this parameter is left blank, the Remote
Console calling function is disregarded.
User input
Parameter Description Option
aa r500.book Page 91 Monday, October 22, 2001 9:32 AM