System information

36
Altos R380 F2 FAQ (Frequently Asked Questions)
ANSWER:
ANSWER:ANSWER:
ANSWER: The RAID utility can be found in Smart Setup Resource Kit DVD.
10. Can I see Intel Onboard SAS/SATA ESRTII RAID BIOS during POST if there is only one hard drive installed and
Intel Onboard SAS/SATA ESRTII software RAID enabled?
ANSWER:
ANSWER:ANSWER:
ANSWER: Yes.
11. Can I configure Intel Onboard SAS/SATA ESRTII RAID with one hard drive?
ANSWER:
ANSWER:ANSWER:
ANSWER: Yes.
12. Do I need to install the RAID Utility to enable the RAID rebuilt of Intel Onboard SAS/SATA ESRTII RAID?
ANSWER:
ANSWER:ANSWER:
ANSWER: No. The RAID rebuilt of Intel Onboard SAS/SATA ESRTII RAID will be functional with or without the
installation of RAID Utility.
13. Does the Intel Onboard SAS/SATA ESRTII RAID support HDD location function?
ANSWER:
ANSWER:ANSWER:
ANSWER: Yes.
14. What is the default setting of disk write cache of Intel Onboard SAS/SATA ESRTII RAID?
ANSWER:
ANSWER:ANSWER:
ANSWER: The disk write cache is disabled by default.
15. How do I enable/disable disk write cache of Intel Onboard SAS/SATA ESRTII RAID?
ANSWER:
ANSWER:ANSWER:
ANSWER: The disk write cache is disabled by default.
You can change it in Device Manager. Please launch Device Manager, and select the properties of volume in
Disk drives and select Policies. Please check/uncheck Enable write caching on the device and click OK.
16. What is volume write-back cache of Intel Onboard SAS/SATA ESRTII RAID?
ANSWER:
ANSWER:ANSWER:
ANSWER: The volume write-back cache is referring to the system memory associated to the RAID volume and
managed by the driver.
17. What is the default setting of logical drive write cache of Intel Onboard SAS/SATA ESRTII RAID?
ANSWER:
ANSWER:ANSWER:
ANSWER: The default setting of logical drive write cache is Write Back.
18. How do I enable/disable the logical drive write cache of Intel Onboard SAS/SATA ESRTII RAID?
ANSWER:
ANSWER:ANSWER:
ANSWER: Please follow the procedures below.
a. Please launch the RAID utility.