Manual

Appendix B: Rack mount configuration168
5 Attach the CMA (cable management arm) to the rear of the server.
The cable arm option allows you to tie-wrap all cables to and from
the system. As you slide the system in and out of the rack, the
cable arm collapses and extends, keeping the cables untangled
and attached to the system.
(1) Insert the smaller CMA extension into the rear of the left inner
rail.
(2) Insert the larger CMA extension into the rear of the left
mounting rail.
(3) Insert the CMA extension connector into the rear of the right
mounting rail.
(4) Insert the CMA arm connector into the plastic cutout on the
CMA extension connector.
(5) Attach the cable clips into the appropriate mounting holes in
the CMA.
(6) Connect the power, peripheral and networking cables into
their appropriate ports.
See “Connecting peripherals” on page 32.