Owner manual

3 Upgrading the system
56
To install the SCSI cable cage
1 Turn off the system and all the peripherals connected to it.
2 Unplug all cables from the power outlets.
3 Place the system unit on a flat, stable surface.
4 Remove the front bezel, inner front panel, side panel, and air
baffle.
5 Insert the HDD cable cage into the housing (1), then tighten the
four thumbscrews to secure it to the chassis (2).
BB!H621!.!FO/cppl!!Qbhf!67!!Uivstebz-!Kvof!23-!3114!!2;34!QN