Owner manual

3 Upgrading the system
46
To remove the Hot Plug HDD cage
Important: Before detaching the Hot Plug HDD cage from the
chassis, make sure to first remove all hard disks from their carriers.
For instructions, refer to the succeeding section.
1 Remove the front bezel, inner front panel, side panel and air
baffle. Refer to the previous section for detailed intructions.
2 Disconnect the following cables from the cage:
a SCSI cable
b SCSI HDD 6 pin management cable
c SCSI HDD power cable
BB!H621!.!FO/cppl!!Qbhf!57!!Uivstebz-!Kvof!23-!3114!!2;34!QN