Technical information

33 Chapter 2
Parameter Description Option
ASF
Specification
Version
Version number of ASF
Event Logging Enables or disables the event logging function of the
system
Enabled
Disabled
Clear All Event
Logs
When this item is set to Enabled, the event log is
cleared and this parameter is set to Disabled for
the next system bootup.
No
Yes
View Event Logs Opens the system event log file for viewing
BIOS POST
Event Logging
BIOS checks the bad processors and memory
modules during the POST process.
When this parameter is enabled, it will make a
log of this operation.
Enabled
Disabled
ECC Event
Logging
ECC ( Error Correction Code ) tests the accuracy
of data as it passes in and out of memory.
When this parameter is enabled, single-bit and
multi-bit memory errors will be recorded in the
event log.
Enabled
Disabled
PCI Device
Event Logging
PCI ( Peripheral Component Interconnect ) is a 32-bit
bus that supports a 64-bit extension for new
processors, such as Pentium processors. It can
run at clock speeds of 33 or 66 MHz.
When this parameter is enabled, any PCI device error
will be recorded in the event log.
Enabled
Disabled
BIOS SETUP UTILITY
Advanced
ASF Information
____________________________________________________
ASF Specification Version 1.03
Event Logging [Enabled]
Clear All Event Logs [No]
> View Event Log
Event Control Interface
BIOS POST Event Logging [Enabled]
ECC Event Logging [Enabled]
PCI Device Event Logging [Enabled]
AC Power Lost/Recovery [Disabled]
Intrusion Event Logging [Enabled]
Clear Intrusion Status [No]
Reset Reduction Memory [No]
E
NABLED: Allow logging
of events.
ЧШ
ЧШЧШ
ЧШ
Select Screen
ХЦ
ХЦХЦ
ХЦ
Select Item
+ - Change Option
F1 General Help
F10 Save and Exit
ESC Exit
V02.03 ©Copyright 1985-2000, American Megatrends Inc.