Technical information

Chapter 2 32
Event Log Configuration
The Event Log Configuration submenu lets you specify the appropriate settings for the system’s event
handling function.
The system event log enables you to record and monitor events that occur in the system( e.g. system
temperature changes, fan stops, etc.).
Hyperthreading Enable or disables the hyperthreading
function of the processor.
When enabled, one physical processor acts
as two logical processors by “ threading”
two sets of data instructions in parallel
streams for processing. The processor can
then simultaneously manage incoming
data from different applications without
losing track of the data processing status
of each.
Enabled
Disabled
Auto-Detect CPU
Frequency
BIOS will set the CPU optimal speed to its
highest speed without re-entering BIOS
Setup to load default settings.
Enabled
Boot up Num Lock Activates the Num Lock function upon
booting
On
Off
CPU Frequency to Bus
Ratio
CPU/Bus ratio of the system. The clock
speed of the bus does not necessarily equal
the CPU’s. Mostly, the bus clock speed is
slower than the CPU clock speed.
21 to 1
PS/2 Mouse Support Enable this parameter if you intend to use
a mouse or trackball with a PS/2 interface.
Enabled
Disabled
Wait for “F1” if Error When this item is enabled you will be
prompted to press F1 when an error is
detected during boot up.
Enabled
Disabled
MPS 1.4 Support If you enable this item, the system BIOS MP
table will be compatible with MultiProcessor
Specification version 1.4
Enabled
Disabled
Memory Test Allows BIOS to skip certain tests while
booting. Then will decrease the time needed
to boot the system.
Enabled
Disabled
Parameter Description Option