Technical information

Chapter 1 5
Item Description
BT1 Battery
BZ1 Buzzer
CN1 +12V Power Connector
CN2 ATX Power Connector
CN3 USB Ports
CN4 VGA / Monitor Port
COM1 Serial Port
CPU 1 and CPU 2 CPU sockets
DM1- DM4 DIMM slots
J2 Front Panel Connector
J3 Floppy disk drive connector
J4 Primary IDE Connector
J5 Secondary IDE Connector
J7 Chassis intrusion connector
J9 BMC daughter board connector
J10 MLB Jumper
1-2 Password Enable ( Default Setting : OFF )
3-4 Clear NVRAM ( Default Setting : OFF )
5-6 Recovery Mode ( Default Setting : OFF )
J13 Wake on LAN Connector
J14 SCSI RAID card HDD LED connector
JF1 CPU 1 Fan connector
JF4 Front Fan connector
JF5 CPU 2 Fan connector
JF8 Rear System Fan connector
JP2 Power Supply management cable connector
( connected to PDB board )
JP8 IPMB connector
JP9 SCSI HDD management cable connector
( connected to Hot Plug HDD cage backplane board )
JP10 Connector for Remote Management Card ( RMC )
J15 Power On/Off connector for RMC
J16 Reset Connector for RMC
KM1 Upper: PS/2 mouse port
Lower: PS/2 Keyboard port
LAN1 Gigabit LAN port ( 10/100/1000 Mbps )
LTP1 Parallel / Printer Port
SLOT 1 64-bit / 66 MHz PCI bus slot ( Zero Channel RAID compliant ) ( Green )
SLOT 2 64-bit / 66 MHz PCI bus slot ( White )
SLOT 3 and SLOT 4 64-bit / 100 MHz PCI-X bus slots ( Blue )
SLOT 5 and SLOT 6 32-bit / 33 MHz PCI bus slot ( 5V Support ) ( White )
SCSI 1 SCSI Connector