Desktop PC User's Guide

3 Upgrading the system
54
6 Insert the drive carrier with the newly-installed floppy drive into
the drive bay.
7 Connect the floppy drive and 4-pin power cables to the new drive.
8 Observe the post-installation instructions described on page 38.
To install a 5.25-inch storage device
Note: If you are installing a new drive in an empty drive bay, skip
steps 2 to 4.
1 Observe the ESD precautions and pre-installation procedures
described on page 37.
2 Disconnect the power and IDE cables from the old drive.
BB!H621!.!FO/cppl!!Qbhf!65!!Xfeoftebz-!Kbovbsz!9-!3114!!21;63!BN