User manual

Appendix A: Embedded SATA RAID Technology for the Altos G310 Mk2
112
Logical drive submenu
2 Select a logical drive, if there is more than one configured and
press <Enter>.
3 Select Initialize from the submenu and press <Enter>.
4 Select Yes at the prompt and press <Enter>.
The CU displays a bar graph showing the initialization progress.
5 When initialization completes, press <Esc> to return to the
previous menu.
If you press <Esc> while initialization is in progress, the options
Stop, Continue, and Abort display, as explained on the previous
page.
Rebuilding failed disks
A manual rebuild is used to rebuild failed drives. The CU allows manual
rebuild for an individual drive. Perform the following steps to rebuild a
drive:
1 Select Rebuild from the CU Management Menu.
The CU displays a device selection window that marks the failed
drives with FAIL indicators.
2 Press the arrow keys to highlight the drive to be rebuilt.
3 Press the spacebar to select the highlighted physical drive for
rebuild.