User manual

109
Logical drive configuration screen
6 Set the RAID level for the logical drive by highlighting RAID and
pressing <Enter>.
The available RAID levels for the current logical drive display.
7 Select a RAID level and press <Enter>.
8 Set the RAID logical drive size and stripe size.
9 When you have defined the current logical drive, select Accept and
press <Enter>.
10 Repeat step 7 to step 10 to configure additional logical drives.
11 Save the configuration when prompted and press <Esc> to return
to the Management Menu.
12 Initialize the logical drives.
Refer to "Initializing logical drives" on page 111 for detailed
instructions.
New configuration and view/add configuration
New Configuration and View/Add Configuration associate logical
drives with partial and/or multiple physical arrays. New Configuration
deletes the existing configuration and replaces it with the
configuration that you specify. View/Add Configuration lets you
display or modify an existing configuration.