User manual

6 Troubleshooting

• If using SCSI drives, verify that each SCSI ID number is unique on

the SCSI bus. See your drive documentation for details on setting

the SCSI ID for your drives.

• If using IDE drives, verify that the master/slave settings are set

correctly. See your drive documentation for details on setting the

master/slave settings.

• If using a RAID configuration with SCSI or SATA drives, make sure

the RAID card is installed correctly.

Bootable CD-ROM is not detected

Check the following:

• Make sure the BIOS is configured to allow the CD-ROM to be the

first bootable device.