Operation Manual

6 User’s Guide
Mode Resolution
H. Freq.
(KHz)
Band Width
(MHz)
Polarity
HV
1 VGA 720 x 350 70 Hz 31.47 28.322 + -
2 VGA 720 x 400 70 Hz 31.47 28.322 - +
3 VGA 640 x 480 60 Hz 31.47 25.175 - -
4 MAC 640 x 480 66 Hz 35.00 32.24 -
-
5 VESA 640 x 480 72 Hz 37.86 31.5 - -
6 VESA 640 x 480 75 Hz 37.50 31.5 - -
7 VESA 800 x 600 56 Hz 35.16 36 + +
8 VESA 800 x 600 60 Hz 37.88 40 + +
9 VESA 800 x 600 75 Hz 46.88 49.5 + +
10 VESA 800 x 600 72 Hz 48.08 50 + +
11 MAC 832 x 624 75 Hz 49.72 57.283 - -
12 VESA 1024 x 768 60 Hz 48.36 65 - -
13 SUN 1024 x 768 65 Hz 52.45 70.49 - -
14 VESA 1024 x 768 70 Hz 56.48 75 - -
15 VESA 1024 x 768 75 Hz 60.02 78.75 + +
PRESET MODES
To reduce the need for adjustment for different modes, the monitor has default setting
modes that are most commonly used as given in the table below. If any of these display
modes are detected, the monitor can self adjusts the picture size and centering. For optimum
adjustment, the user is suggested to perform the Auto Setup under Windows “Full Screen”
pattern or using the pattern in the floppy disk provided. When none of the mode is
matched, the user can store their preferred modes in the user modes. The monitor is
capable of storing up to 9 user modes. The only condition to store as a user mode is the
new display information must have 1 KHz difference for horizontal frequency or 1 Hz for
vertical frequency or the sync signal polarities are different from the default modes.