Technical information

41
Chapter 3
Machine Disassembly and Replacement
Disassembly Procedure
Disassemble the base
1. Remove the neck cover.
2. Remove the four screws to release the hinge.
3. Remove the base
Disassemble the chassis
1. Remove the five screws to release the back cover.
2. Remove the two screws to release the EMI cover from chassis.
3. Remove the Main Board, Power Board, Inverter and Key Board. (See the next page for detail.)
4. Remove the six screws from chassis then take the chassis.
5. Remove the four screws from chassis and release the panel.