Technical information

11
LCD Monitor General Specification
Panel type: 17 “ active matrix color TFT LCD
1). AU EN05
Display size: 337.92mm (H) × 270.34mm(V)
Display mode:
VGA 640 × 480 (60//72/75 Hz)
SVGA 800 × 600 (56/60/72/75 Hz)
XGA 1024 × 768 (60/70/75 Hz)
SXGA 1280 × 1024 (60//75 Hz) standard resolution
Pixel pitch: 0.264mm(H) × 0.264mm(V)
Display dot: 1280 x (RGB) × 1024
Pixel clock: 25.2 – 135.0MHz
Contrast ratio: θ = 0° AU EN05 450:1
Brightness: AU EN05 260 cd/㎡
Response time (Tr/Tf): AU EN05(16ms)
Display color: 16.2M(6 bit color+FRC)
Viewing angle: AU EN05 L / R ≧80/ ≧ 80 (≧ 160 degrees horizontal typical)
U / D ≧ 70 / ≧ 70 (≧ 140 degrees vertical typical)
Luminance uniformity: > 80 % (typical)
Pc interface: 1).Video: RGB analog 0.7V peak to peak
Sync: TTL positive or negative
Signal connector: 15 pin Mini D type, (standard VGA video)
3.5 mm stereo audio jack (Audio) (For AR577 only)
Audio power: 1.5Wrms + 0.5Wrms (300Hz – 1.3kHz)
Front control: power on/off with LED select adjustment
Interface frequency
Horizontal Frequency 30KHz --80KHz
Vertical Frequency 55Hz ------75Hz
Plug & play: Support VESA DDC2B functions
Power Input voltage: Single phase, 50/60HZ, 100 VAC to 240VAC ±10%
Total output power: 50 Watt max.
LCD Panel Specification
LCD Panel Model (Hydis LT17E12-200)
ٛ
Display Type active matrix color TFT LCD
ٛ
Resolution 1280x1024 pixels
ٛ
Display Dot 1280x (RGB) x 1024
ٛ
Display Area 337.92mm(H) x 270.34mm(V)
ٛ
Pixel Pitch 0.264mm(H) x 0.264mm(V)
ٛ
Display Color 16M (6 bite color+FRC)