Service manual

7. Assembly and Disassembly Procedures (continued)
S11
Use both hand to remove the LCD panel m odule and put Rear Bezel aside.
S12
Use a Phillips-head screwdriver unscrewed the screw to release the Heat-sink.
S13
Use a Phillips-head screwdriver unscrewed the number 1~2 screws to disassemble the power plug.
S14
Use a Hex-head screwdriver unscrewed the No.3~4 Hex Nut to release the D-Sub connectors .
S15
Use a Phillips-head screwdriver unscrewed the No.1~4 screws to disassemble the LCD panel and Bracket C hassis module.
S16
Unplug 4 lamp cables (No. 1~4).
Steps Photo
Procedures
3
4
D-Sub Cable
1
2
1 2
3
4
3
4
Part Number Part Name
7737616800P0A RC ASSY_#6800_ABS 94V0_ACER_T 17ANHW 1 - 7110330052P0A SCREW-MACHING -F LAT HEAD-M3-5-NI 1 Screw Size=M3x5; T orque= 5~7KG F KG F.CM 7140330083P0A SCREW_DOUBLE THREAD_NONE_FLAT HEAD_M3_8 2 S crew Size=M3x8; T orque=5~ 6KG F.CM 7110730082P0A SCREW_MACHINE_NO N E_HEX WASHER HEAD_M3_8m m_Fe NI 2 Screw Size=M3x8; Torque=4.5~6.5KGF KG F.CM 7110330052P0A SCREW-MACHING -F LAT HEAD-M3-5-NI 4 Screw Size=M3x5; T orque:= 2~ 3KGF .CM
-- --
Spare Parts Usage
Q'ty Remark
Go to cover page
48
ACER AL1716W