Service manual

7. Assembly and Disassembly Procedures (continued)
Part Number
Part Name
7115240121P0A SCREW_M4*12_DOUBLE W ASHIER 4 Screw Size=M4x12; Torque=12~14KGF.CM 7740412200P0A STAND_BASE_ACER_AL1717_#6800_ABS 94HB 1 - 7742612091P0A
STAND_COVER_#6800_ABS 94HB_ABS 94HB_ACER R17BNW
1-
7749600200P0A TAPE_MASKING_PACKING_25m m(w)x45m_LITEON 2 - 7730203550P0A CARD_SCREEN PROTECTOR_ACER_T17AA_AL1716W 1 - 7735431685P0A
LABEL_VISTA(WORKS)_CMYK_25.4x11.2_LENOVO T15AN
1-
7749003210P0A
BAG_LDPE+EPE_ORDINARY_ALL MODEL_L680xW550mmxH0.55mm
1-
7749003190P0A BAG_PE_ORDINAR Y_FOR ACER_L300xW 300xT0.05 mm 1 - 7749106560P0A
CUSHION FOAM_EPS_ACER-AL1716W_2160SETS_ L<(>&<)>R_472x117x398(H)
2-
7749600200P0A TAPE_MASKING_PACKING_25m m(w)x45m_LITEON 4 -
Q'ty Remark
Spare Parts List
S20
Lock the stand cover according to the order of the num ber 1~2 till tw o parts firm ly attached .
S22
Stick a Vista label on the rear side of Front Bezel (nearby Stand Base).
S23
Take a LDPE+EPE bag (L680xW550mm xH0.55mm) to cover the LCD monitor.
S24
Take a PE bag (L300xW300xT0.05 mm ) to cover the Stand Base.
ProceduresSteps Photo
Take two cushion foams; one is held the left side of LCD monitor, and another is held the right side.
S25 S21
Turn over the LCD module (screen faced down), then take a Stand Base and put it on specific positions as photo left. Use a Phillip s - he ad screwd r iv er ass emb led the Sta nd bas e to LCD m odule with 4 screws.
S19
Stick a Screen C ard on the Front Bezel with two tapes.
1 2
Line 1
Line 2
Go to cover page
44
ACER AL1716W