Service manual

7. Assembly and Disassembly Procedures (continued)

Part Number

Part Name

6814175010P14 LCD_17"W_HSD170MGW 1-A00(LTC) _HSD_1370g 1 -

7742005280P0A SPONGE_G ASKET FO RM _WHT_W 10xH10xL40mm 1

-- -

7110330052P0A SCREW-MACHING -FLAT HEAD-M3-5-NI 4 Screw Size=M3x5; Torque:=2~3KGF.CM

Spare Parts List

Q'ty Remark

Put a panel on a protective cushion and exame the surface

see if has any unexpect dust or scratch.

Turn over the panel and stick a Gasket form on the position

Move the Bracket Chassis Module on the top of the LCD

panel and connect FFC cable to LCD panel.

Take lam p cables out from the holes shown as the photo.

Plug 4 lamp cables to the connectors of Power Board.

S10

Us e a Phillips- head screwdriver screwed the No.1~4 screws

on both side and assemble the LCD panel and Bracket

Chassis module.

Steps Photo

Procedures

Panel Lamp cables

1 2

Go to cover page

ACER AL1716W