Operation Manual

5
CONTROLS AND CONNECTORS
CABLE CONNECTIONS
Connect the signal cable: Connect one end of the 15-pin VGA cable to the back
of the monitor and connect the other end to the computer’s D-Sub port.
Connect the audio cable: (Option-only for Audio model)Connect the audio cable
between the monitor's audio input and the PC's audio output (green port).
Connect the audio cable: Plug the power cable of your monitor into a nearby outlet.
Plug the other end of the power cord into the PC port.
ATTENTION: If the AC outlet is not grounded, install the proper grounding adapter (not supplied).
Figure 1 Connecting Cables
1. Power Cable 2. Signal Cable
3. Audio cable (Option-only for
Audio model)
3