User`s guide

28
Temperature and Humidity Range
Temperature
Operating 5 ˚C to 40 ˚C (∆T<10 ˚C/h)
(41 ˚F to 104 ˚F (∆T<50 ˚F/h))
Non-Operating (mech.) – 40 ˚C to 70 ˚C (∆T<20 ˚C/h)
(– 40 ˚F to 158 ˚F (∆T<68 ˚F/h))
Non-Operating (tape) – 40 ˚C to 45 ˚C (∆T<20 ˚C/h)
(– 40 ˚F to 113 ˚F (∆T<68 ˚F/h))
Humidity
Operating 20 to 80% RH, non-condensing
Maximum wet bulb temperature = 26 ˚C
Non-Operating (mech.) 5 to 95% RH (∆T<30%/h)
Non-Operating (tape) 20 to 80% RH (∆T<30%/h)
Power Requirements
SDX-500V
Voltage Max Ripple
Current
Typical Maximum
5 V +/– 5 % 100 mVp-p 1.1 A 1.4 A
12 V +/– 10 % 150 mVp-p 0.4 A 1.2 A
SDX-400V
Voltage Max Ripple
Current
Typical Maximum
5 V +/– 5 % 100 mVp-p 1.1 A 1.4 A
12 V +/– 10 % 150 mVp-p 0.4 A 1.2 A
Shock
Operating No Data Loss
Half Sine
5 G Peak 3 ms
3 axes, 3 directions
*Interval 10 seconds
Non-Operating No Device Damage
Half Sine
90 G Peak 3 ms
(30 G Peak 11 ms)
3 axes, 3 directions