Technical information

Chapter 1 3
Special Design Specification
Wake-Up Event Specification
All Onboard
Connectors List
• Rear I/O connectors:
• One PS/2 keyboard port, one PS/2 mouse port
• One parallel port, one serial port
• One GA (CRT) port
• One RJ-45 LAN port
• Four USB ports for non-1394 SKU; four USB ports + IEEE 1394 port for
1394 SKU
• 7.1 channel phone jack
• Onboard connectors:
• One CPU socket
• Two memory sockets
• One PCI Express x16 socket
• One PCI Express x1 socket
• Two PCI slots
• One FDD slot
• One PATA IDE connector
• Four SATA IDE connectors
• Three 2*7 pin Intel FPIO specification USB pin connectors (follow Intel
FPIO standard specification)
• One 2*5 pin Intel FPIO specification microphone-in/headphone-out pin
connector
• One serial port 2*5 pin connector (2
nd
serial port)
• One CD-in four-pin connector (CD-ROM audio input)
• One S/PDIF three-pin connector
• One four-pin CPU fan connector
• One four-pin system fan connector with three-pin system fan co-layout
• One intrusion alarm connector
• One 24-pin ATX interface PS3/PS2 SPS connector
• One 2*7 pin front panel IO header
• Two reserved two-pin GPIO connector
• One onboard buzzer
• Color management for onboard connector
Description
Thermal Design • At least four steps fan speed control by hardware monitor
• Intel MTM technology, default read/write enabled
• CPU overheat (120
o
C) power off protection
• Compliant with Intel 2005 Mainstream and Performance FMB design
• Compliant with Intel 2006 TDP
S1 S3 S4 S5
Power Button Enabled Enabled Enabled Enabled
PS2 Keyboard Enabled Enabled n/a n/a
USB Keyboard Enabled Enabled n/a n/a
WOL (wake on LAN) n/a n/a n/a n/a
WOR (wake on Ring) n/a n/a n/a n/a
RTC (real time clock) n/a n/a n/a Enabled