Technical information

2 Chapter 1
LAN • Controller: PCI-E Giga LAN
• H/W, F/W, and S/W should be able to support ASF compliant
USB • Controller: ATI SB600 compatible
• Onboard four USB back panel ports
• Connector pin: standard Intel FPIO pin definition
• Data transfer rate support: USB 2.0/1.1
• For 1394 SKU: ten ports
• Two for front daughter board
• Two for internal USB card reader
• Four for rear I/O (two co-lay with rear I/O, under RJ-45 port, for internal
USB RF & IR receiver board support)
• Two reserved header
• For non-1394 SKU: ten ports
• Four for front daughter board
• Four for rear I/O (two co-lay with rear I/O, under RJ-45 port)
• Two reserved header
Front Panel IO
Header
System LDE
Definition
• Power state LED:
• S0: blue steady
• S1/S3: blue blinking
• S4/S5: off
• HDD state LED:
• IDE active: blue blinking
• IDE idle: off
• LAN state LED:
• LAN active: blue blinking
• LAN idle: off