Technical information

Chapter 1 1
Overview
Main Board
Description
Size Max. 244 mm x 244 mm, MicroATX
Processor • Socket type: Intel socket T LGA775 pin
• Socket quantity: one
• Intel Prescott 775 / Smithfield / Cedar Mill / Presler / Conroe, FSB 533/800/
1066MHz (FMB 95W or lower)
• Intel Celeron D 775, FSB 533MHz
System Chipset • GMCH: ATI RC415s
• ICH: ATI SB600
Memory • Two DDR2 connectors
• Capacity:
• 256MB to 1GB DDR2 667/533/400 unbuffered ECC SDRAM module
support
• Max. 256MB to 4GB memory support
• Dual-channel function enabled when plugging in two same memory
size DDR2 memory modules
Onboard Graphic
Solution
• ATI RC415s integrated graphics device (IGD) solution
• DVMT technology support
• One VGA port on the rear side
PCI Express / PCI
Slots
• One PCI Express x16 slot
• One PCI Express x1 slot
• Two PCI 2.2 5V slots
FDD • One slot for FDD
• 1.44MB / 3 mode 3.5” devices support
IDE • One 40-pin PATA IDE slot, PIO mode 0/1/2/3/4 and ATA mode 33/66/100
support
• Four SATA slots, HDD/CD-ROM/CD-RW/DVD-ROM/DVD-RW/DVD+RW/
DVD Dual/DVD Super Multi Plus support
Audio • Controller: ATI SB600 compatible
• Chip: HD audio codec ALC888 HD codec 7.1 with S/PDIF out/in
• Connectors support:
• Rear six jacks that follow HD audio definition
• Front microphone in
• Front headphone out
• S/PDIF header (1*3)
• CD-in
• AUX-in
• Front panel audio header (2*5) support
• HD de-pop CKT added
• S/N ration: 90 dB at rear output jack
System Specification
Chapter 1