Technical information

32 Chapter 2
Integrated Peripherals
This page sets up some parameters for peripheral devices connected to the system. Press <Esc> to
return to the main menu setting page.
Onboard PCI SATA Controller (RAID)
Use this item to enable or disable the onboard PCI SATA controller.
USB 2.0 Support (Enabled)
Use this item to enable or disable the USB 2.0 support.
USB Controller (Enabled)
Use this item to enable or disable the USB controller.
Onboard LAN function (Enabled)
User this item to enable or disable the onboard LAN function.
Onboard LAN Boot ROM (Disabled)
Use this item to enable or disable the booting from the onboard LAN or a network add-on card
with a remote boot ROM installed.
Onboard IEEE 1394 Controller (Enabled)
Use this item to enable or disable the onboard VIA 1394 device.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Integrated Peripherals
OnBoard PCI S-ATA Controller IDE
USB 2.0 Support Enabled
USB Controller Enabled
Onboard LAN Controller Enabled
Onboard LAN Boot ROM Disabled
Onboard IEEE1394 Controller Enabled
Serial Port1 Address 3F8/IRQ4
Serial Port2 Address 2F8/IRQ3
Serial Port2 Mode Normal
Parallel Port Address 378
Parallel Port Mode ECP
ECP Mode DMA Channel DMA3
Parallel Port IRQ IRQ7
Help Item
Option
IDE
F10: Save & Exit
+/-/: Value
Enter : Select
ESC: Exit
F9: Optimized Defaults
F1:General Help
: Move