Technical information

26 Chapter 2
Standard CMOS Features
The option displays basic information about the system. Press <Esc> to return to the main menu
setting page.
Date and Time
The Date and Time items show the current date and time set on the computer. If you are running
a Windows OS, these items are automatically updated whenever you make changes to the
Windows Date and Time Properties utility.
IDE Primary Master/Slave SATA 1~4
Your computer has one IDE channel and can be installed with one or two devices (Master and
Slave). Use this item to configure each device on the IDE channel. This main board features four
SATA connectors supporting four SATA drives. SATA refers to Serial ATA (Advanced Technology
Attachment), the standard interface for the IDE hard drives which are currently used in most PCs.
Drive A
The item defines the properties of any diskette drive attached to the system.
Halt On
This item defines the operation of the system POST (Power On Self Test) routine. YOu can use this
item to select which types of errors in the POST are sufficient to halt the system.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Standard CMOS Setup
Date Thu 07/13/2006
Time 00: 01: 44
f
f
IDE Primary Master Not Detected
IDE Primary Slave ATAPI CDROM
S-ATA 1 Not Detected
S-ATA 2 Not Detected
S-ATA 3 Not Detected
S-ATA 4 Not Detected
Use [ENTER], [TAB]
or [SHIFT-TAB] TO
select a field.
Use [+] or [-] to
configure system Time.
Help Item
Drive A 1.4 MB 3
1
/
2
’’
Halt On All. But Keyboard
Base Memory 640K
Extended Memory 383M
Total Memory 512M
F10: Save & Exit
+/-/: Value
Enter : Select ESC: Exit
F9: Optimized Defaults
F1:General Help
: Move
f
f
f
f