Technical information

4 Chapter 1
System LED Definition
System S State Wake-Up devices supported with default setting
S1 (Idle)
T Power Button : Enabled
T PS/2 Keyboard : Enabled
T USB Keyboard : Enabled
T RTC : Disabled
T LAN : Disabled
T Modem (Ring) : Disabled
S3 (Suspend to RAM)
T Power Button : Enabled
T PS/2 Keyboard : Enabled
T USB Keyboard : Enabled
T LAN : Disabled
T Modem (Ring) : Disabled
S4 (Suspend to Disk)
T Power Button : Enabled
T PS/2 Keyboard : Enabled
T USB Keyboard : Disabled
T RTC : Disabled
T LAN : Disabled
T Modem (Ring) : Disabled
S5 (Shut Down)
T Power Button : Enabled
T PS/2 Keyboard : Enabled
T USB Keyboard : Enabled
T RTC : Disabled
T LAN : Disabled
T Modem (Ring) : Disabled
Special Design Specifications
Item Description
Thermal Design
T Dynamic FAN speed control by hardware monitor
T CPU Over-temperature (over 120
o
C) power off
protectio
Power On / Wake-up event
T Power Button : S1/S3/S4/S5
T PS/2 Keyboard : S1/S3/S4/S5
T RTC : S1/ S5
T LAN : S1/S3/S5
T Modem (Ring) : S1/S3/S5