Technical information

10 Chapter 1
BIOS Hotkey List
Hotkey Function Description
c Enter BIOS Setup Utility Press while the system is booting to
enter BIOS Setup Utility.
System Memory
Item Specification
Onboard Embedded Memory Size 0
Memory Socket Number 2 Sockets
Supported Memory Size per Socket 128 MB/ 256 MB/ 512 MB/ 1024 MB
Supported Maximum Memory Size 2GB (1024MB x2 )
Supported Memory Speed 266/333/400 MHz
Supported memory voltage 2.5 V
Support memory module package 184-pin DIMM
Support to parity check feature Yes
Support to Error Correction Code (ECC)
feature
Yes
Memory module combinations You can install memory modules in any combination as
long as they match the above specifications.
VRM
Function VRM Specification Typical Voltage Power Source Maximum Output
CPU VRM VRM10 0.8375~1.6v 12 Voltage 91A
CPU VRM VRM 9.0 1.1-1.85 Voltage 12 Voltage 70A
Cache Memory
Item Specification
First-Level Cache Configurations
Cache function control Enable/Disable by BIOS Setup
Second-Level Cache Configurations
The information below is only applicable to system installed with a Pentium 4 processor
Tag RAM Location On Processor
L2 Cache RAM Location On Processor
L2 Cache RAM type PBSRAM (Pipelined-burst Synchronous RAM)
L2 Cache RAM size Depends on CPU, which is local configured
L2 Cache RAM speed Full of the processor core clock frequency (Advanced Transfer Cache)
L2 Cache function control Enable/Disable by BIOS Setup
L2 Cache scheme Fixed in write-back
LAN Interface
Item Specification
LAN Controller RTL8100C LAN Controllers